Download the laser cutting file template from the Juno server.
Go to \\Juno\Public\Laser Cutter\Laser Cutter File_Open or download the file named "Laser Cutter File.dwg".
The "0" layer represents the laser's maximum bed size of 32" x 18". The laser operators use this for targeting alignment when plotting. If you change this size, your parts will not cut correctly.
You must either draw your parts to be cut in this drawing, or cut and paste parts from another AutoCAD file into this file.
Parts pasted into the drawing will retain their original layer names. You must place these parts onto their new appropriate layers and delete the old layers.
All parts must be placed within the dotted lines of the "Bleed_Boundary" layer. The effective cutting area is 31 ½" x 17 ½"
You may not alter the size of the rectangle in the "0" layer.
You must use the layers provided (i.e., all parts to be cut must be placed on the magenta cut layer, all parts to be scored must be placed on the blue vector score layer)._You may make additional layers named "innercut03", innercut04", etc. as needed.
You may make copies of the 32" x 18" box in the "0" layer for larger files or for files with multiple materials.
Thou shall not use this file for anything but laser cutting. (Plotting from this file will embed information that conflicts with the laser drivers.)
Thou shall not scale the original page layout.
Thou shall not come to the laser cutter with any AutoCAD file formatted in any way other than described above. You will be turned away.