Adding Networked Printers

*all printing must take place onsite, wireless and remote printing is not supported

From a Lab PC

• Open the Start Menu
• In the search bar, type in \\vulcan.design.upenn.edu
• Right-click on the desired printer and select "Connect..." from the menu that appears
• The printer will now show up in Start Menu -> Devices and Printers

Adding a networked printer on a personal PC (This workflow is for staff only.)

• Make sure your WiFi is disabled and you've connected to Ethernet (networked printing is limited to local Ethernet only)
• Open the Start Menu
• In the search bar, type in \\vulcan.design.upenn.edu
• When prompted to log in, enter your username as design\username and use your Design password.
  • If you need to reset your Design password, you can do so here: https://kite.password.isc.upenn.edu/design
• Once you have authenticated successfully, a list of printers will appear. Right-click on the desired printer and select "Connect..." from the menu that appears.
• The printer will now show up in Start Menu -> Devices and Printers

From a Lab Mac

• All printers in the Mac Labs are managed by IT.
• Available printers can be viewed from System Preferences -> Printers & Scanners

Adding a networked printer on a personal Mac

*not all drivers will be supported by Mac, please use the computer labs if you are having trouble printing from your personal mac computer

• Make sure your WiFi is disabled and you've connected to Ethernet (networked printing is limited to local Ethernet only)
• Download and install these HP Printer drivers for Mac. If using MEY3-7800-GX, download this Xerox driver.
• Follow these instructions to add the desired printer.